环氧地坪漆在固化之后也应该是刚性适中，如果发脆，就会出问题。 环氧地坪漆为什么会在固化之后会发脆呢？

Epoxy floor paint after curing should also be moderate stiffness, if brittle, it will be a problem. Why is epoxy floor paint brittle after curing? 大致原因如下：

The main reasons are as follows:

施工场所的温度过高，引起环氧地坪固化的速度加快，导致发脆；

The construction site temperature is too high, causing the epoxy floor curing speed to accelerate, resulting in brittle.

环氧环氧地坪漆材料的配比不精准，影响了环氧环氧地坪漆的固化，这是最常见的错误；

The imprecise proportion of epoxy floor paint affects the curing of epoxy floor paint, which is the most common mistake.

环氧地坪漆材料中添加了其它的固化剂，导致地坪发脆，这也是施工人员最容易犯的错误。

Other curing agents are added to the floor paint, which makes the floor brittle. This is also the most common mistake that builders make.

知道了地坪发脆的原因，我们应该怎么避免这类错误的发生呢？

Knowing the reason why the floor is crisp, how should we avoid such mistakes?

在施工时，一定要注意施工场所的环境，如果温度过高或过低都不宜施工，当温度过高时，固化速度过快，而温度过低时，固化的速度就会过慢，都会影响地坪的质量；

In construction, we must pay attention to the environment of the construction site, if the temperature is too high or too low is not suitable for construction, when the temperature is too high, the curing speed is too fast, and when the temperature is too low, the curing speed will be too slow, will affect the quality of the floor;

针对环氧地坪漆材料配比不精准的问题，需要施工人员提高技术，熟悉环氧树脂和固化剂的配比，如果实在不了解，可以询问厂家，在确定之后再进行配比，切不可以盲目进行。

In view of the inaccurate proportion of floor paint materials, it is necessary for the builders to improve their skills and familiarize themselves with the proportion of epoxy resin and curing agent. If they really do not understand, they can ask the manufacturer, and then make the proportion after determination, so they can not blindly carry out.

选择固化剂时，一定要慎重，有些环氧树脂对固化剂是有一定要求的，如果不了解，也可以询问厂家，不能在不了解的情况下，胡乱搭配

When choosing curing agent, be careful. Some epoxy resins have certain requirements for curing agent. If you don't know, you can also ask the manufacturer. You can't mix them up without knowing.

如果在前期施工时不注意，致使地坪在使用过程中出现了发脆的问题，那就会给地坪的使用带来极大的不便。并且需要对地坪进行修整，浪费人力物力。

If you do not pay attention to the early construction, resulting in the use of the floor in the process of brittle problems, it will bring great inconvenience to the use of the floor. It also needs to repair the floor and waste manpower and material resources.