环氧地坪除了起水泡之外，还有些会觉得时间长了会有一定的色差，到底是哪些原因导致了环氧地坪的色差，这些都是估计是由于之前做环氧地坪的时候没有施工好，所以要找像重庆全瑞装饰工程有限公司这样的施工方，才会给你们一个好的环氧地坪：

Epoxy floor in addition to blistering, there are some will feel that a long time there will be a certain color difference, in the end what causes the color difference of the epoxy floor, these are estimated to be due to the previous floor when the construction is not good, so to find such as Chongqing Quanrui Decoration Engineering Co., Ltd. construction party, will give you We have a good floor: 第一，环氧树脂涂料主剂沉淀，未充分搅拌均匀;

First, the main agent of epoxy resin is precipitated and not fully stirred evenly.

第二，倒料在地面上，与前接缝处之接触时间过久;

Second, the contact time on the ground and the front seams is too long.

第三，涂层厚薄不均;

Third, the coating thickness is uneven.

第四，施工中涂断料;

Fourth, coating is broken during construction.

第五，采用不同批号面漆。

Fifth, use different batch topcoat.

第一，有可能没做断水处理或底漆封闭不良。

First, it may not be done without water treatment or poor sealing.

第二，结构体地下层、水箱旁、底楼层或其他地面水气湿度偏高;

Second, the humidity of the structure, underground water tank, floor, floor or other surface is high.

既然会出现这种情况，全瑞环氧地坪就为大家教几招怎样预防环氧地坪起水泡的办法：

Since this will happen, Quanrui floor for you to teach a few tips on how to prevent foaming epoxy floor methods:

第一，施工前先以水份计协助判断;

First, the water content should be used to help judge before construction.

第二，水份及水压太高的地点须先做断水处理;

Second, where water and water pressure are too high must be treated first.

第三，选择亲水性的环氧树脂底漆。以消除浮色。

Third, choose hydrophilic epoxy primer. To eliminate floating color.

既然我们知道了环氧树脂地坪如果不正规操作，会给以后我们的环氧地坪带来一定的麻烦，如果以后各位需要做环氧地坪的话请联系我们全瑞地坪哟，记得到时候一定要做好一个监工工作，我们也可以再施工过程中，让环氧树脂地坪产生色差做好预防工作：

Now that we know that if the epoxy floor is not normal operation, will bring some trouble to our epoxy floor in the future, if you need to do the epoxy floor in the future, please contact us all Rui floor yo, remember to do a good job at the time of a supervisory work, we can also re-construction process, so that epoxy trees. The color difference of grease floor will be done well.

第一，尽可能使用同一批号环氧树脂涂料。

First, use the same batch of epoxy coatings as far as possible.

第二，环氧树脂地坪施工前助剂应先充分搅拌均匀;

Second, before the construction of epoxy resin floor, the auxiliaries should be well mixed before construction.

第三，避免与前接缝处接触间隔太久，尽可能整个操作线一起施工;

Third, avoid contact with the front seams for too long.

第四，尽量使用固定工具及加强施工人员施工熟练度;

Fourth, try to use fixed tools and enhance the proficiency of construction personnel.

第五，环氧树脂涂料需一次备足，防止断料;

Fifth, epoxy coatings should be prepared at one time to prevent material breakage.