脚手架有扣件式钢管脚手架、碗扣式钢管脚手架、承插式钢管移动脚手架、门式脚手架，竹木移动脚手架。扣件式是采用扣件和钢管进行搭设的门式脚手架。 落地式门式脚手架，表示梯形脚手架不是悬挑的，直接从地面或者楼板面开始搭设，没有型钢悬挑基座。悬挑梯形脚手架，又叫挑架，一般是由型钢悬挑后，在型钢上面搭设脚手架。

Scaffolds include fastener type steel pipe scaffolds, bowl type steel pipe scaffolds, socket type steel pipe scaffolds, door type scaffolds, bamboo and wood scaffolds. Fastener type is a scaffold erected by fasteners and steel pipes. The landing scaffolding means that the scaffolding is not cantilevered. It is erected directly from the ground or floor, and there is no section steel cantilevered base. Cantilevered scaffolds, also called pick frames, are usually erected by profiled steel and scaffolding is erected on section steel.

扣件式脚手架指的是，脚手架材料不同形成的类别。

Fastener scaffolds refer to different types of scaffold materials.

落地式脚手架，是搭设方式不同，采用的类别。

Scaffolding scaffolding is a different type of scaffolding.

二者分类方式不同，不能相互比较。

The two categories are different and cannot be compared with each other. 

1、满堂脚手架定义为在纵、横方向，由不少于三排立杆并与水平杆、水平剪刀撑、竖向剪刀撑、扣件等构成的脚手架。该架体顶部作业层的施工荷载通过水平杆传递给立杆，顶部立杆呈偏心受压状态；

1. Full-hall scaffolding is defined as scaffolding in the vertical and horizontal directions, which consists of not less than three rows of vertical poles and horizontal poles, horizontal scissors, vertical scissors, fasteners, etc. The construction load of the working layer on the top of the frame is transmitted to the vertical pole through the horizontal pole, and the top vertical pole is under eccentric compression.

2、满堂支撑架定义为在纵、横方向，由不少于三排立杆并与水平杆、水平剪刀撑、竖向剪刀撑、扣件等构成的承力支架。该架体顶部的施工荷载通过可调托撑传给立杆，顶部立杆呈轴心受压状态。

2. Full hall bracket is defined as a bearing bracket consisting of not less than three rows of vertical bars and horizontal bars, horizontal scissors braces, vertical scissors braces, fasteners, etc. The construction load at the top of the frame is transferred to the vertical pole through the adjustable support, and the top vertical pole is subjected to axial compression.